-
? 材質：不銹鋼
-
? 額定壓力：350bar
-
? 試驗壓力：400bar
-
? 負載壓力：450bar
-
? 流量（符合 GB 25974.3-2010 標準）：25L/min
-
? 接口型式：快插式
-
? Material: Stainless Steel
-
? Rated Pressure: 350 bar
-
? Test Pressure: 400 bar
-
? Load Pressure: 450 bar
-
? Flow Rate (Compliant with GB 25974.3-2010): 25 L/min
-
? Connection Type: Quick-Connect Type
設計說明
雙液控單向閥配置通用安裝法蘭，設兩個獨立出口，可對接溢流閥等元件。采用雙對置式液控單向閥結構，一側受壓力作用時，另一側閥組即開啟。閥體為錐座式設計，推薦用于穩定缸的雙側鎖止工況，閥內組件為插裝式結構，可整體更換。
工作原理
當油缸伸出時，液壓油經其中一組閥從 A1 口流向 C1 口，中間控制活塞同步開啟另一組閥，油缸環形腔側經 C2 口與 A2 口導通；當油缸縮回時，上述液壓油流向及閥組開啟邏輯反向運作。
Design Description
The twin pilot-operated check valve is fitted with a universal mounting flange and provided with two independent outlets, which can be connected to components such as pressure relief valves. Adopting a structure of two opposing pilot-operated check valves, the valve group on one side opens when the other side is subjected to pressure. The valve body features a cone-seat design and is recommended for the double-side locking condition of stabilizing cylinders. The internal components of the valve are of a cartridge structure and can be replaced as a whole assembly.
Working Principle
When the cylinder extends, hydraulic oil flows from Port A1 to Port C1 through one set of valves, and the middle control piston synchronously opens the other set of valves, connecting the annulus side of the cylinder to Port A2 via Port C2. When the cylinder retracts, the flow direction of the hydraulic oil and the opening logic of the valve groups operate in the reverse manner.
