輸入電壓:12 V DC
輸入電流:<100mA
接口:6個SKK24 傳感器接口和2個SKK24總線接口
材質:塑料; 不銹鋼底座
防護等級:IP68
Input voltage: 12V DC
Input current: <100mA
Interfaces: 6 SKK24 sensor, 2 SKK24 bus
Material: Plastic; stainless steel base
Protection: IP68
設計
傳器驅動板的電路板封裝于可靠的塑料外殼內,并通過不銹鋼基板固定于適配支架上。所有與傳感器及支架控制器的總線連接均通過SKK24連接器實現,可支持1至3塊傳感器驅動板的通信需求。
功能
傳感器驅動板通過CAN-FD總線與支架控制器通信,可借助16位高分辨率ADC采集最多6個傳感器數據。兼容標準0.5-4.5V直流電壓輸出傳感器,也可適配符合Namur標準的電流輸出型傳感器。每個節點最多支持3臺EC-Sensor傳感器 驅動板以總線方式連接,亦可與DRD EC系列中其他CAN-FD設備混合組網。傳感器驅動板內置高精度傾角傳感器,結合其他傳感器數據,可實現液壓支架高度計算與各類運動狀態檢測。
Design
The sensor driver board’s circuit board is in a robust plastic housing, fixed to the adaptive support with a stainless steel base. All bus connections to sensors and support controllers use SKK24 connectors, supporting 1 to 3 sensor driver boards for communication.
Function
The sensor driver board communicates with the support controller via CAN-FD bus, collecting data from up to 6 sensors with a 16-bit high-res ADC. It works with standard 0.5-4.5V DC voltage output sensors and Namur-standard current output sensors. Each node can connect up to 3 EC-Sensor driver boards in bus mode, and can also mix with other CAN-FD devices in the DRD EC series. It has a built-in high-precision tilt sensor, which combines with other sensor data to calculate hydraulic support height and detect various motion states.